Safety Measures in Using Chainsaws While Making DIY Projects

DIY projects can be a great way for everyone to get the opportunity to make creative things without losing money. You need to gather some tools before you start a project. For cutting materials like wood, paper, plastic, and metals, you just require a chainsaw to make your work a lot easier with the desired output.

Chainsaws are a very powerful and dangerous tool. Whenever you use that, make sure you are using safety equipment and check out the relevant instructions. Check out the following advice below before you start.

Types of Chainsaw

A chainsaw is a heavy and powerful machine. Whenever you need to get a chainsaw, think about its weight and needs. It’s best to go to a store and check out if you can handle chainsaws for DIY projects.

There are two types of chainsaws people mostly use- petrol chainsaws and electric chainsaws. Electric chainsaws are generally suitable for smaller projects because they are lighter than petrol saws, as well as being less noisy and much easier to use. You need to make sure that the power lead is kept out of the working zone. A petrol chainsaw is powerful and high-powered. You must be careful while using it because it’s heavier and noisier. If you are doing a large project like cutting logs, you should use petrol saws.

Think about the usage of the saw when you are going to buy it. If you are thinking about using it occasionally, then get an electric saw. However, if you are going to cut large tree branches, then a powerful, sharp saw is a must. If you are wondering how you can make a chainsaw sharp, click here.

Use Protection

Be careful when using saws. You have to wear suitable clothing and protective gear. Chainsaw helmets with face masks and a noise-canceling headphone may do the trick to use the chainsaw effectively and also safely. While cutting with a chainsaw, wood pieces will go flying around. So, you need to defend your body from any injuries.

Use thick gloves because you need to move your hands but not extremely thick. They will protect your hands from any sharp pieces. If the weather is way too hot, but you have to work with a chainsaw, then you shall not avoid wearing the heavy protective gear. These gears should cover the most crucial parts of the body during the work.

 Workplace Safety

If you are starting to venture into big projects, make sure you have a clean and spacious place to use a chainsaw. Use a sawhorse to avoid slipping and kickbacks.

If you are cutting trees or branches, make sure you have space for the timber to fall. Ensure people are aware of your work so that they will not interfere in your work. Call your buddy to work with you because, in any problematic situation, they can assist you whenever you need to do any project.

 Making A Cut

When you start cutting trees or objects for DIY projects, make sure you know how to maintain a chainsaw.

  • When you are cutting a tree, make sure you do it in the correct position. Make sure no one is standing where the tree falls. Clear all the obstacles and woods when you are done.
  • Take all of the branches and cut them into manageable pieces. Try to work on the uphill side whenever you start cutting. Check the tree’s balance before you start cutting branches.

Binding, kickback, pushback, and pull-in are risky phases when you are cutting. In this type of situation, some people may lose control of the chainsaw.

  1. Binding happens when you cut clamps, and it creates blockage inside the chain kerf. This can lead you to kickback, pushback, and pull-in situations. Learn cutting techniques and measure the weight of the branch whenever you start cutting to avoid binding.
  2. Kickback happens whenever you cut an object it pinches the blade, and a reverse action occurs due to this. Kickback reacts one-tenth of a second faster than you can respond. To avoid kickbacks, don’t cut with a saw’s tip. Be aware of the upper part of the saw tip because this area is the most prone to create kickback.
  3. Pushback happens when the top of the chain bar suddenly stops due to pinching or hitting an object. For this, the saw moves back to the user instantly, and major problems can happen. To minimize the issue, be aware of the object’s size and weight. Cut branches one at a time and draw the blade in a straight line without twisting.
  4. Pull-in happens when the bottom of the bar stops due to pinching or hitting an object. For this, the user moves forward. To avoid moving forward of the saw, cut with bumper spikes and set it against the object you are cutting. Make sure you start your cutting when the saw is at the required speed.

Safety and the Chainsaw

Be cautious when using the tools and saws. Some saws come with different features. Couple of them are listed below:

  • Chain break gives support to stop the chain from kickback or pushback.
  • Chain catcher assists in decreasing the chances of broken or derailed chain hitting its operator.
  • A low kickback bar chain lowers the chances of the kickback.
  • The bar tip guard denies the saw from touching the wood.
  • A handguard secures the hand from a kickback.
  • A chain oiler lubricates the chain with the bar, and it prevents the chainsaw from overheating.
  • Anti-vibration decreases the tension to your joints and muscle while using a chainsaw.
  • The stop switch shuts down the chainsaw without freeing the saw.
  • Spark arresters stop any fire hazard, which may occur by using chainsaws.
  • Bumper spikes keep the chainsaw in position while cutting against the wood.

These are the basic instructions for you to follow whenever you use a chainsaw for DIY projects. Before you use a chainsaw for cutting, make sure you maintain safety to avoid accidents or any major damage.